Оставить сообщение

Если вас заинтересовала наша продукция и вы хотите узнать больше подробностей, пожалуйста, оставьте сообщение здесь, мы ответим вам как можно скорее.
представлять на рассмотрение

PVP Iodine USP32 | CAS 25655-41-8

  • Povidone-iodine (PVP-I), CAS 25655-41-8, is a water-soluble iodine complex of polyvinylpyrrolidone and iodine, supplied as a red-brown, free-flowing powder.
  • Our USP32 grade carries 9.0–12.0% available iodine with controlled iodide content, giving formulators a stable and reproducible source of active iodine for aqueous systems.
  • Batch-specific COA with every shipment; minimum order quantity 500 kg.
  • Минимальный объем заказа (MOQ) :

    500kgs
  • Происхождение продукта :

    China
  • Цвет :

    Red-brown
  • Порт отправки :

    Shanghai, China
  • Время выполнения :

    2-3 weeks
  • Масса :

    25kg
  • Номер дела. :

    25655-41-8
  • Молекулярная формула :

    (C6H9NO)n·xI2
  • Появление :

    Red-brown powder
  • Анализ :

    9.0–12.0%
  • Приложение :

    Personal care & medicated cleansing, antiseptic solutions, disinfection

Povidone-iodine is a complex in which iodine is bound to a polyvinylpyrrolidone carrier. In the dry powder the iodine is held within the polymer matrix; once the powder is dissolved in water, iodine is released progressively, which is the basis of the material's sustained antimicrobial action. Because the iodine is supplied from the complex rather than as free iodine, aqueous PVP-I solutions can be formulated without alcohol and are markedly less irritating than traditional iodine tincture.

As a raw material, PVP Iodine USP32 is used to build antiseptic washes, surgical hand-scrub soaps, medicated skin cleansers, antiseptic foams and wipes, and concentrate solutions for disinfection. The powder dissolves readily in water and in ethanol, so both aqueous and hydro-alcoholic systems can be prepared from the same grade.

Each batch is tested against the full USP32 panel, including identification A and B, available iodine, iodide content, loss on drying, residue on ignition, nitrogen, heavy metals and arsenic. The results for the referenced lot are reproduced in the specification table below, so that buyers can compare the certificate they receive with the values published here.




  •  
     
     
     

Core Advantages

1.Consistent available iodine.

The lot reported here assayed 10.56% available iodine against a 9.0–12.0% window, giving formulators a predictable basis for dose calculation.

2.Low iodide content.

Iodine ion measured 3.48% against a limit of 6.0%, which indicates a well-formed complex and a stable release profile rather than a high level of free iodide.

3.Low moisture and low ash.

Loss on drying was 2.76% (limit 8.0%) and residue on ignition 0.014% (limit 0.025%), leaving little non-active material to interfere with a formulation.

4.Documented impurity control.

Heavy metals were below 20 ppm and arsenic below 1.5 ppm, with identification A and B confirmed against USP32.

5.Water and ethanol solubility.

The same grade supports both aqueous antiseptic solutions and hydro-alcoholic preparations, without a separate solubiliser or dispersing step.

 

Technical Specifications 

 

Item

USP32 Specification

Typical Result (Lot 20150121)

Appearance

Red-brown powder

Conforms

Identification A, B

According to USP32

Conforms

Available iodine, %

9.0–12.0

10.56

Iodine ion, %

≤ 6.0

3.48

Loss on drying, %

≤ 8.0

2.76

Residue on ignition, %

≤ 0.025

0.014

Nitrogen, %

9.5–11.5

10.57

Heavy metals (as Pb), ppm

≤ 20

< 20

Arsenic, ppm

≤ 1.5

< 1.5


Key Application 

  • Personal Care & Medicated Cleansing 
  1. Antiseptic skin cleansers and hand washes for professional, institutional and food-handling use
  2. Surgical hand-scrub soaps and pre-operative skin preparation products
  3. Medicated soaps, bath and shower preparations for skin prone to microbial overgrowth
  4. Antiseptic foams, wipes and gels built on an aqueous PVP-I base

Preparation guidance: the powder is dissolved in demineralised water under gentle stirring until no particles remain. As a starting point, one part powder at 10% available iodine combined with nine parts water gives a solution of approximately 1% available iodine; the exact strength should be confirmed by titration and by stability testing of the finished preparation.

Suggested working concentration: dilutions are normally set by the target available-iodine level of the finished product rather than by powder weight, and should be validated against the intended use and the requirements of the destination market.

  • Healthcare, Wound Care & Disinfection
  1. Antiseptic solutions for minor cuts, abrasions and skin disinfection
  2. Throat and oral antiseptic preparations where national rules permit
  3. Concentrates for instrument, surface and equipment disinfection
  4. Hand-sanitising and skin-prep products for clinics and care facilities
  • Veterinary & Aquaculture
  1. Teat dips and skin antiseptics for dairy and livestock operations
  2. Disinfection of equipment, tanks and holding areas
  3. Aquaculture and fishery disinfectants where local registration allows

FAQ: Cetearyl Alcohol

Q1. What is PVP Iodine USP32?

It is povidone-iodine, CAS 25655-41-8, a complex of polyvinylpyrrolidone and iodine supplied as a red-brown powder and tested against the USP32 monograph. The grade is defined by its available iodine content, which for this product is 9.0–12.0%.

Q2. What does “available iodine 9.0–12.0%” mean in practice?

Available iodine is the fraction of iodine that can be released and take part in antimicrobial action. At a measured 10.56%, one kilogram of powder carries roughly 105 g of available iodine, so the strength of a finished solution can be calculated directly from the powder weight and the assay of the batch.

Q3. How do I dissolve the powder?

Add the powder to stirred demineralised water at room temperature and continue stirring until the solution is clear; do not dump the powder into still water, as this forms lumps that dissolve slowly. Hydro-alcoholic solutions can be prepared in the same way using an ethanol/water blend.

Q4. Can PVP Iodine be used in cosmetic formulations?

In several markets povidone-iodine is classified as a disinfectant or medicinal active rather than a cosmetic ingredient. Formulators should confirm the classification and permitted concentration for the destination market before use; our technical team can supply the COA, SDS and specification documents needed for that assessment.

Q5. What is the minimum order quantity and lead time?

The MOQ is 500 kg, with a standard lead time of two to three weeks from order confirmation. Packaging is a 25 kg fibre drum, and 500 kg jumbo bags are available on request.

Q6. Which documents are supplied?

A batch-specific certificate of analysis is issued with every shipment, covering the full USP32 panel. A safety data sheet and a technical data sheet are available on request, and third-party inspection can be arranged for export orders.

Q7. How should the product be stored, and what is its shelf life?

Keep the container sealed and protected from light in a dry, cool, ventilated area, away from reducing agents, alkalis and metal powders. Under these conditions the referenced lot was assigned a 24-month shelf life.

Q8. How is PVP Iodine different from PVP K30?

PVP K30 is the polyvinylpyrrolidone carrier on its own, used as a film former and binder. PVP Iodine is that carrier loaded with iodine, which makes it an antimicrobial raw material. The two products serve different functions and are not interchangeable in a formula.

Q9. Are samples available?

Yes. Samples are released from a production lot and are accompanied by the corresponding COA, so that trials can be run against the same specification that will be delivered at bulk scale.

 

Оставить сообщение
Если вас заинтересовала наша продукция и вы хотите узнать больше подробностей, пожалуйста, оставьте сообщение здесь, мы ответим вам как можно скорее.
представлять на рассмотрение

Сопутствующие товары

Мы искренне надеемся на визиты и обмен опытом с нашими клиентами. Мы будем и дальше стремиться к созданию персонализированных продуктов, чтобы помочь клиентам завоевать рынок и достичь взаимовыгодного сотрудничества.

Оставить сообщение

Оставить сообщение
Если вас заинтересовала наша продукция и вы хотите узнать больше подробностей, пожалуйста, оставьте сообщение здесь, мы ответим вам как можно скорее.
представлять на рассмотрение

Дом

Продукты

whatsApp

контакт